Author: Not specified Language: c
Description: Not specified Timestamp: 2013-05-24 19:44:01 +0000
View raw paste Reply
  DogLcd Library - Hello World
  Demonstrates the basic use of a DOGM text LCD display.
 This sketch prints "Hello World!" to the LCD
 and shows the time.
 See the hardware-documention for wiring instuctions
 We assume  the following pins are connected:
 * LCD SI pin to digital pin 2
 * LCD CLK pin to digital pin 3
 * LCD RS pin to digital pin 4
 * LCD CSB pin to digital pin 5
 * LCD RESET pin is not used
 * LCD Backlight pin is not used

// include the library code:
#include <DogLcd.h>

// initialize the library with the numbers of the interface pins
DogLcd lcd(2, 3, 4, 5);

void setup() {
  // set up the LCD type and the contrast setting for the display
  // Print a message to the LCD.
  lcd.print("hello, world!");

void loop() {
  // set the cursor to column 0, line 1
  // (note: line 1 is the second row, since counting begins with 0):
  lcd.setCursor(0, 1);
  // print the number of seconds since reset:
View raw paste Reply