Author: Not specified Language: text
Description: Not specified Timestamp: 2008-04-09 21:10:52 -0400
View raw paste Reply
  1. [    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
  2. [    0.000000] BIOS-provided physical RAM map:
  3. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  4. [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  5. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  6. [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
  7. [    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
  8. [    0.000000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
  9. [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
  10. [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  11. [    0.000000] 1151MB HIGHMEM available.
  12. [    0.000000] 896MB LOWMEM available.
  13. [    0.000000] found SMP MP-table at 000f4ae0
  14. [    0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
  15. [    0.000000] Zone PFN ranges:
  16. [    0.000000]   DMA             0 ->     4096
  17. [    0.000000]   Normal       4096 ->   229376
  18. [    0.000000]   HighMem    229376 ->   524272
  19. [    0.000000] early_node_map[1] active PFN ranges
  20. [    0.000000]     0:        0 ->   524272
  21. [    0.000000] On node 0 totalpages: 524272
  22. [    0.000000]   DMA zone: 32 pages used for memmap
  23. [    0.000000]   DMA zone: 0 pages reserved
  24. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  25. [    0.000000]   Normal zone: 1760 pages used for memmap
  26. [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
  27. [    0.000000]   HighMem zone: 2303 pages used for memmap
  28. [    0.000000]   HighMem zone: 292593 pages, LIFO batch:31
  29. [    0.000000] DMI 2.4 present.
  30. [    0.000000] ACPI: RSDP signature @ 0xC00F64A0 checksum 0
  31. [    0.000000] ACPI: RSDP 000F64A0, 0014 (r0 GBT   )
  32. [    0.000000] ACPI: RSDT 7FFF3000, 0034 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
  33. [    0.000000] ACPI: FACP 7FFF3040, 0074 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
  34. [    0.000000] ACPI: DSDT 7FFF30C0, 46EB (r1 GBT    NVDAACPI     1000 MSFT  100000C)
  35. [    0.000000] ACPI: FACS 7FFF0000, 0040
  36. [    0.000000] ACPI: HPET 7FFF7840, 0038 (r1 GBT    NVDAACPI 42302E31 NVDA       98)
  37. [    0.000000] ACPI: MCFG 7FFF7880, 003C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
  38. [    0.000000] ACPI: APIC 7FFF77C0, 007C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
  39. [    0.000000] ACPI: PM-Timer IO Port: 0x1008
  40. [    0.000000] ACPI: Local APIC address 0xfee00000
  41. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  42. [    0.000000] Processor #0 15:11 APIC version 16
  43. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  44. [    0.000000] Processor #1 15:11 APIC version 16
  45. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
  46. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
  47. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  48. [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
  49. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  50. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  51. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
  52. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
  53. [    0.000000] ACPI: IRQ0 used by override.
  54. [    0.000000] ACPI: IRQ2 used by override.
  55. [    0.000000] ACPI: IRQ9 used by override.
  56. [    0.000000] ACPI: IRQ14 used by override.
  57. [    0.000000] ACPI: IRQ15 used by override.
  58. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  59. [    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
  60. [    0.000000] Using ACPI (MADT) for SMP configuration information
  61. [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
  62. [    0.000000] Built 1 zonelists.  Total pages: 520177
  63. [    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper xforcevesa initrd=/casper/initrd.gz quiet splash --
  64. [    0.000000] mapped APIC to ffffd000 (fee00000)
  65. [    0.000000] mapped IOAPIC to ffffc000 (fec00000)
  66. [    0.000000] Enabling fast FPU save and restore... done.
  67. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  68. [    0.000000] Initializing CPU#0
  69. [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  70. [    0.000000] Detected 3013.713 MHz processor.
  71. [    0.000000] spurious 8259A interrupt: IRQ7.
  72. [    0.000000] Console: colour VGA+ 80x25
  73. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  74. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  75. [    0.000000] Memory: 2067328k/2097088k available (2015k kernel code, 28428k reserved, 916k data, 364k init, 1179584k highmem)
  76. [    0.000000] virtual kernel memory layout:
  77. [    0.000000]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
  78. [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  79. [    0.000000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  80. [    0.000000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  81. [    0.000000]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
  82. [    0.000000]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
  83. [    0.000000]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
  84. [    0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  85. [    0.000000] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
  86. [    0.000000] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
  87. [    0.000000] hpet0: 3 32-bit timers, 25000000 Hz
  88. [    0.080000] Calibrating delay using timer specific routine.. 6032.98 BogoMIPS (lpj=12065963)
  89. [    0.080000] Security Framework v1.0.0 initialized
  90. [    0.080000] SELinux:  Disabled at boot.
  91. [    0.080000] Mount-cache hash table entries: 512
  92. [    0.080000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
  93. [    0.080000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  94. [    0.080000] CPU: L2 Cache: 512K (64 bytes/line)
  95. [    0.080000] CPU 0(2) -> Core 0
  96. [    0.080000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
  97. [    0.080000] Compat vDSO mapped to ffffe000.
  98. [    0.080000] Checking 'hlt' instruction... OK.
  99. [    0.096000] SMP alternatives: switching to UP code
  100. [    0.096000] Early unpacking initramfs... done
  101. [    0.292000] ACPI: Core revision 20070126
  102. [    0.292000] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  103. [    0.296000] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
  104. [    0.296000] SMP alternatives: switching to SMP code
  105. [    0.296000] Booting processor 1/1 eip 3000
  106. [    0.304000] Initializing CPU#1
  107. [    0.388000] Calibrating delay using timer specific routine.. 6027.43 BogoMIPS (lpj=12054872)
  108. [    0.388000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
  109. [    0.388000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  110. [    0.388000] CPU: L2 Cache: 512K (64 bytes/line)
  111. [    0.388000] CPU 1(2) -> Core 1
  112. [    0.388000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
  113. [    0.388000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
  114. [    0.388000] Total of 2 processors activated (12060.41 BogoMIPS).
  115. [    0.388000] ENABLING IO-APIC IRQs
  116. [    0.388000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  117. [    0.428000] Brought up 2 CPUs
  118. [    0.476000] migration_cost=0
  119. [    0.476000] Booting paravirtualized kernel on bare hardware
  120. [    0.476000] Time: 17:58:33  Date: 03/09/108
  121. [    0.476000] NET: Registered protocol family 16
  122. [    0.476000] EISA bus registered
  123. [    0.476000] ACPI: bus type pci registered
  124. [    0.484000] PCI: PCI BIOS revision 3.00 entry at 0xfb300, last bus=2
  125. [    0.484000] PCI: Using configuration type 1
  126. [    0.484000] Setting up standard PCI resources
  127. [    0.484000] ACPI: EC: Look up EC in DSDT
  128. [    0.488000] ACPI: Interpreter enabled
  129. [    0.488000] ACPI: (supports S0 S1 S4 S5)
  130. [    0.488000] ACPI: Using IOAPIC for interrupt routing
  131. [    0.492000] ACPI: PCI Root Bridge [PCI0] (0000:00)
  132. [    0.492000] PCI: Probing PCI hardware (bus 00)
  133. [    0.496000] PCI: Transparent bridge - 0000:00:04.0
  134. [    0.496000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  135. [    0.496000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  136. [    0.512000] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
  137. [    0.512000] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  138. [    0.512000] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
  139. [    0.512000] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  140. [    0.512000] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  141. [    0.512000] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  142. [    0.516000] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  143. [    0.516000] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  144. [    0.516000] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  145. [    0.516000] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  146. [    0.516000] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
  147. [    0.516000] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
  148. [    0.516000] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
  149. [    0.516000] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  150. [    0.516000] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
  151. [    0.516000] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
  152. [    0.516000] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  153. [    0.516000] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
  154. [    0.516000] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
  155. [    0.516000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
  156. [    0.516000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
  157. [    0.516000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
  158. [    0.516000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
  159. [    0.516000] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
  160. [    0.516000] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
  161. [    0.516000] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
  162. [    0.516000] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
  163. [    0.516000] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
  164. [    0.516000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
  165. [    0.516000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
  166. [    0.516000] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
  167. [    0.516000] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
  168. [    0.516000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
  169. [    0.516000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
  170. [    0.516000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
  171. [    0.516000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
  172. [    0.516000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
  173. [    0.516000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
  174. [    0.516000] Linux Plug and Play Support v0.97 (c) Adam Belay
  175. [    0.516000] pnp: PnP ACPI init
  176. [    0.516000] ACPI: bus type pnp registered
  177. [    0.520000] pnp: PnP ACPI: found 14 devices
  178. [    0.520000] ACPI: ACPI bus type pnp unregistered
  179. [    0.520000] PnPBIOS: Disabled by ACPI PNP
  180. [    0.520000] PCI: Using ACPI for IRQ routing
  181. [    0.520000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  182. [    0.548000] NET: Registered protocol family 8
  183. [    0.548000] NET: Registered protocol family 20
  184. [    0.548000] pnp: 00:01: ioport range 0x1000-0x107f has been reserved
  185. [    0.548000] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
  186. [    0.548000] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
  187. [    0.548000] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
  188. [    0.548000] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
  189. [    0.548000] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
  190. [    0.548000] pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
  191. [    0.548000] pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
  192. [    0.548000] pnp: 00:01: iomem range 0x0-0x0 could not be reserved
  193. [    0.548000] pnp: 00:0c: iomem range 0xf0000000-0xf1ffffff could not be reserved
  194. [    0.548000] pnp: 00:0d: iomem range 0xcde00-0xcffff has been reserved
  195. [    0.548000] pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
  196. [    0.548000] pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
  197. [    0.548000] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
  198. [    0.552000] Time: hpet clocksource has been installed.
  199. [    0.552000] Switched to high resolution mode on CPU 0
  200. [    0.552000] Switched to high resolution mode on CPU 1
  201. [    0.580000] PCI: Bridge: 0000:00:04.0
  202. [    0.580000]   IO window: disabled.
  203. [    0.580000]   MEM window: f5000000-f50fffff
  204. [    0.580000]   PREFETCH window: disabled.
  205. [    0.580000] PCI: Bridge: 0000:00:09.0
  206. [    0.580000]   IO window: a000-afff
  207. [    0.580000]   MEM window: f2000000-f4ffffff
  208. [    0.580000]   PREFETCH window: e0000000-efffffff
  209. [    0.580000] PCI: Setting latency timer of device 0000:00:04.0 to 64
  210. [    0.580000] PCI: Setting latency timer of device 0000:00:09.0 to 64
  211. [    0.580000] NET: Registered protocol family 2
  212. [    0.624000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  213. [    0.624000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
  214. [    0.624000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  215. [    0.624000] TCP: Hash tables configured (established 131072 bind 65536)
  216. [    0.624000] TCP reno registered
  217. [    0.640000] checking if image is initramfs... it is
  218. [    1.028000] Freeing initrd memory: 7305k freed
  219. [    1.028000] audit: initializing netlink socket (disabled)
  220. [    1.028000] audit(1207763913.552:1): initialized
  221. [    1.028000] highmem bounce pool size: 64 pages
  222. [    1.028000] VFS: Disk quotas dquot_6.5.1
  223. [    1.028000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  224. [    1.028000] io scheduler noop registered
  225. [    1.028000] io scheduler anticipatory registered
  226. [    1.028000] io scheduler deadline registered
  227. [    1.028000] io scheduler cfq registered (default)
  228. [    1.028000] Boot video device is 0000:02:00.0
  229. [    1.028000] PCI: Setting latency timer of device 0000:00:09.0 to 64
  230. [    1.028000] assign_interrupt_mode Found MSI capability
  231. [    1.028000] Allocate Port Service[0000:00:09.0:pcie00]
  232. [    1.028000] isapnp: Scanning for PnP cards...
  233. [    1.380000] isapnp: No Plug & Play device found
  234. [    1.396000] Real Time Clock Driver v1.12ac
  235. [    1.396000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  236. [    1.396000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  237. [    1.396000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  238. [    1.396000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  239. [    1.396000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  240. [    1.400000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  241. [    1.400000] input: Macintosh mouse button emulation as /class/input/input0
  242. [    1.400000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  243. [    1.400000] PNP: PS/2 controller doesn't have AUX irq; using default 12
  244. [    1.400000] serio: i8042 KBD port at 0x60,0x64 irq 1
  245. [    1.400000] mice: PS/2 mouse device common for all mice
  246. [    1.400000] EISA: Probing bus 0 at eisa.0
  247. [    1.400000] Cannot allocate resource for EISA slot 1
  248. [    1.400000] EISA: Detected 0 cards.
  249. [    1.400000] TCP cubic registered
  250. [    1.400000] NET: Registered protocol family 1
  251. [    1.400000] Using IPI No-Shortcut mode
  252. [    1.400000]   Magic number: 4:907:996
  253. [    1.400000]   hash matches device ttyd9
  254. [    1.400000]   hash matches device ttyac
  255. [    1.400000] Freeing unused kernel memory: 364k freed
  256. [    1.428000] input: AT Translated Set 2 keyboard as /class/input/input1
  257. [    2.548000] AppArmor: AppArmor initialized<5>audit(1207763915.052:2):  type=1505 info="AppArmor initialized" pid=1242
  258. [    2.556000] fuse init (API version 7.8)
  259. [    2.560000] Failure registering capabilities with primary security module.
  260. [    2.940000] usbcore: registered new interface driver usbfs
  261. [    2.940000] usbcore: registered new interface driver hub
  262. [    2.940000] usbcore: registered new device driver usb
  263. [    2.940000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
  264. [    2.940000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16
  265. [    2.940000] PCI: Setting latency timer of device 0000:00:02.1 to 64
  266. [    2.940000] ehci_hcd 0000:00:02.1: EHCI Host Controller
  267. [    2.940000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
  268. [    2.940000] ehci_hcd 0000:00:02.1: debug port 1
  269. [    2.940000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
  270. [    2.940000] ehci_hcd 0000:00:02.1: irq 16, io mem 0xf5108000
  271. [    2.940000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  272. [    2.940000] usb usb1: configuration #1 chosen from 1 choice
  273. [    2.940000] hub 1-0:1.0: USB hub found
  274. [    2.940000] hub 1-0:1.0: 10 ports detected
  275. [    2.944000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
  276. [    2.968000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  277. [    2.968000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  278. [    2.976000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
  279. [    2.984000] SCSI subsystem initialized
  280. [    3.000000] libata version 2.21 loaded.
  281. [    3.020000] Floppy drive(s): fd0 is 1.44M
  282. [    3.040000] FDC 0 is a post-1991 82077
  283. [    3.044000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
  284. [    3.044000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 17
  285. [    3.044000] PCI: Setting latency timer of device 0000:00:02.0 to 64
  286. [    3.044000] ohci_hcd 0000:00:02.0: OHCI Host Controller
  287. [    3.044000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
  288. [    3.044000] ohci_hcd 0000:00:02.0: irq 17, io mem 0xf5107000
  289. [    3.100000] usb usb2: configuration #1 chosen from 1 choice
  290. [    3.100000] hub 2-0:1.0: USB hub found
  291. [    3.100000] hub 2-0:1.0: 10 ports detected
  292. [    3.204000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
  293. [    3.204000] ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
  294. [    3.252000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f500c000-f500c7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
  295. [    3.252000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
  296. [    3.252000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 19
  297. [    3.252000] PCI: Setting latency timer of device 0000:00:07.0 to 64
  298. [    3.252000] forcedeth: using HIGHDMA
  299. [    3.772000] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:07.0
  300. [    3.772000] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
  301. [    3.772000] NFORCE-MCP61: chipset revision 162
  302. [    3.772000] NFORCE-MCP61: not 100% native mode: will probe irqs later
  303. [    3.772000] NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround.
  304. [    3.772000] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
  305. [    3.772000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
  306. [    3.772000] Probing IDE interface ide0...
  307. [    4.508000] hda: TSSTcorp CDDVDW SH-S202G, ATAPI CD/DVD-ROM drive
  308. [    4.524000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001a4d0000ee0a4f]
  309. [    5.180000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  310. [    5.180000] sata_nv 0000:00:08.0: version 3.4
  311. [    5.180000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
  312. [    5.180000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
  313. [    5.180000] PCI: Setting latency timer of device 0000:00:08.0 to 64
  314. [    5.180000] scsi0 : sata_nv
  315. [    5.184000] scsi1 : sata_nv
  316. [    5.184000] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001cc00 irq 20
  317. [    5.184000] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001cc08 irq 20
  318. [    5.192000] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<4>hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33
  319. [    5.192000]
  320. [    5.192000] Uniform CD-ROM driver Revision: 3.20
  321. [    5.652000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  322. [    5.660000] ata1.00: Host Protected Area detected:
  323. [    5.660000]  current size: 488395055 sectors
  324. [    5.660000]  native size: 488397168 sectors
  325. [    5.660000] ata1.00: native size increased to 488397168 sectors
  326. [    5.660000] ata1.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133
  327. [    5.660000] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  328. [    5.676000] ata1.00: configured for UDMA/133
  329. [    5.988000] ata2: SATA link down (SStatus 0 SControl 300)
  330. [    5.996000] scsi 0:0:0:0: Direct-Access     ATA      ST3250310AS      3.AA PQ: 0 ANSI: 5
  331. [    5.996000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
  332. [    5.996000] ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16
  333. [    5.996000] PCI: Setting latency timer of device 0000:00:08.1 to 64
  334. [    5.996000] scsi2 : sata_nv
  335. [    5.996000] scsi3 : sata_nv
  336. [    5.996000] ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001e000 irq 16
  337. [    5.996000] ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001e008 irq 16
  338. [    6.308000] ata3: SATA link down (SStatus 0 SControl 300)
  339. [    6.628000] ata4: SATA link down (SStatus 0 SControl 300)
  340. [    6.644000] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
  341. [    6.644000] sd 0:0:0:0: [sda] Write Protect is off
  342. [    6.644000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  343. [    6.644000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  344. [    6.644000] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
  345. [    6.644000] sd 0:0:0:0: [sda] Write Protect is off
  346. [    6.644000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  347. [    6.644000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  348. [    6.644000]  sda: sda1 sda2 sda3 sda4
  349. [    6.684000] sd 0:0:0:0: [sda] Attached SCSI disk
  350. [    6.688000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  351. [   16.212000] end_request: I/O error, dev fd0, sector 0
  352. [   28.380000] end_request: I/O error, dev fd0, sector 0
  353. [   28.380000] Buffer I/O error on device fd0, logical block 0
  354. [   40.544000] end_request: I/O error, dev fd0, sector 0
  355. [   40.544000] Buffer I/O error on device fd0, logical block 0
  356. [   53.716000] end_request: I/O error, dev fd0, sector 0
  357. [   65.876000] end_request: I/O error, dev fd0, sector 0
  358. [   65.876000] Buffer I/O error on device fd0, logical block 0
  359. [   78.048000] end_request: I/O error, dev fd0, sector 0
  360. [   78.048000] Buffer I/O error on device fd0, logical block 0
  361. [   80.048000] ISO 9660 Extensions: Microsoft Joliet Level 3
  362. [   80.076000] ISO 9660 Extensions: RRIP_1991A
  363. [   80.316000] Registering unionfs 1.4
  364. [   80.316000] unionfs: debugging is not enabled
  365. [   80.324000] loop: module loaded
  366. [   80.584000] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher
  367. [  127.876000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
  368. [  127.876000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
  369. [  128.320000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  370. [  128.624000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  371. [  128.932000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
  372. [  128.940000] parport_pc 00:0a: reported by Plug and Play ACPI
  373. [  128.940000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
  374. [  129.012000] input: PC Speaker as /class/input/input2
  375. [  129.192000] ieee80211_init: failed to initialize WME (err=-17)
  376. [  129.380000] Linux agpgart interface v0.102 (c) Dave Jones
  377. [  129.444000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
  378. [  129.444000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
  379. [  129.444000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
  380. [  129.444000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
  381. [  129.488000] wmaster0: Selected rate control algorithm 'simple'
  382. [  129.788000] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
  383. [  129.788000] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17
  384. [  129.788000] PCI: Setting latency timer of device 0000:00:05.0 to 64
  385. [  130.976000] Adding 2048276k swap on /dev/sda3.  Priority:-1 extents:1 across:2048276k
  386. [  132.288000] No dock devices found.
  387. [  132.320000] input: Power Button (FF) as /class/input/input3
  388. [  132.320000] ACPI: Power Button (FF) [PWRF]
  389. [  132.320000] input: Power Button (CM) as /class/input/input4
  390. [  132.320000] ACPI: Power Button (CM) [PWRB]
  391. [  132.868000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (version 2.00.00)
  392. [  132.868000] powernow-k8: MP systems not supported by PSB BIOS structure
  393. [  132.868000] powernow-k8: MP systems not supported by PSB BIOS structure
  394. [  136.056000] lp0: using parport0 (interrupt-driven).
  395. [  136.352000] ppdev: user-space parallel port driver
  396. [  138.784000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
  397. [  138.784000] apm: disabled - APM is not SMP safe.
  398. [  139.016000] Failure registering capabilities with primary security module.
  399. [  139.840000] Bluetooth: Core ver 2.11
  400. [  139.840000] NET: Registered protocol family 31
  401. [  139.840000] Bluetooth: HCI device and connection manager initialized
  402. [  139.840000] Bluetooth: HCI socket layer initialized
  403. [  139.944000] Bluetooth: L2CAP ver 2.8
  404. [  139.944000] Bluetooth: L2CAP socket layer initialized
  405. [  139.964000] Bluetooth: RFCOMM socket layer initialized
  406. [  139.964000] Bluetooth: RFCOMM TTY layer initialized
  407. [  139.964000] Bluetooth: RFCOMM ver 1.8
  408. [  145.224000] NET: Registered protocol family 17
  409. [  148.688000] NET: Registered protocol family 10
  410. [  148.688000] lo: Disabled Privacy Extensions
  411. [  148.688000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  412. [  159.308000] eth0: no IPv6 routers present
  413. [  530.512000] usb 2-2: new full speed USB device using ohci_hcd and address 2
  414. [  530.732000] usb 2-2: configuration #1 chosen from 1 choice
  415. [  537.276000] usbcore: registered new interface driver hiddev
  416. [  537.284000] input: Razer Razer Copperhead Laser Mouse as /class/input/input5
  417. [  537.284000] input: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:02.0-2
  418. [  537.292000] input: Razer Razer Copperhead Laser Mouse as /class/input/input6
  419. [  537.292000] input: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:02.0-2
  420. [  537.292000] usbcore: registered new interface driver usbhid
  421. [  537.292000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
View raw paste Reply