Author: Not specified Language: text
Description: Not specified Timestamp: 2017-08-26 22:02:09 +0000
View raw paste Reply
  1. gpio2 at omapgpio2: 32 pins
  2. omapgpio3 at obio1 addr 0x481ae000-0x481aefff
  3. gpio3 at omapgpio3: 32 pins
  4. obio2 at mainbus0 base 0x4a000000-0x4affffff: On-Board IO
  5. gpmc0 at mainbus0 base 0x50000000: General Purpose Memory Controller, rev 6.0
  6. gpmc0: CS#0 valid, addr 0x00000000, size  16MB
  7. edma0 at mainbus0 base 0x49000000-0x490fffff
  8. tiotg0 at mainbus0 base 0x47400000-0x47404fff: TI dual-port USB controller: version v1.0.0.13
  9. motg0 at tiotg0 port 0: 0x4ea20800 version v0.0.0
  10. motg0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
  11. usb0 at motg0: USB revision 2.0
  12. motg1 at tiotg0 port 1: 0x4ea20800 version v0.0.0
  13. motg1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
  14. usb1 at motg1: USB revision 2.0
  15. com0 at obio0 addr 0x44e09000-0x44e09fff intr 72: OMAP UART, working fifo
  16. com0: console
  17. omapgpio0 at obio0 addr 0x44e07000-0x44e07fff
  18. gpio0 at omapgpio0: 32 pins
  19. tiiic0 at obio0 addr 0x44e0b000-0x44e0bfff intr 70: rev 0.11, scheme 1
  20. tiiic0: 32-bytes FIFO
  21. iic0 at tiiic0: I2C bus
  22. seeprom0 at iic0 addr 0x50: AT24Cxx or compatible EEPROM: size 32768
  23. tps65217pmic0 at iic0 addr 0x24: TPS65217C Power Management Multi-Channel IC (rev 1.2)
  24. tps65217pmic0: power sources [USB] max 1800 mA, AC max 2500 mA
  25. tps65217pmic0: [LDO1: 1800 mV] [LDO2: 3300 mV] [LDO3: 1800 mV] [LDO4: 3300 mV] [DCDC1: 1500 mV] [DCDC2: 1325 mV] [DCDC3: 1125 mV]
  26. omapdmtimer1 at obio0 addr 0x44e31000-0x44e31fff intr 67: DMTIMER1ms
  27. omapwdt32k0 at obio0 addr 0x44e35000-0x44e35fff: rev 0.1
  28. sdhc0 at obio1 addr 0x48060000-0x48060fff intr 64: SDHC controller
  29. sdhc0: EDMA tx channel 24, rx channel 25
  30. sdhc0: SDHC 2.0, rev 49, platform DMA, 96000 kHz, HS 1.8V 3.0V, 1024 byte blocks
  31. sdmmc0 at sdhc0 slot 0
  32. sdhc1 at obio1 addr 0x481d8000-0x481d8fff intr 28: SDHC controller
  33. sdhc1: EDMA tx channel 2, rx channel 3
  34. sdhc1: SDHC 2.0, rev 49, platform DMA, 96000 kHz, HS 1.8V 3.0V, 1024 byte blocks
  35. sdmmc1 at sdhc1 slot 0
  36. omapdmtimer0 at obio1 addr 0x48040000-0x48040fff intr 68: DMTIMER2
  37. omapdmtimer2 at obio1 addr 0x48044000-0x48044fff intr 92: DMTIMER4
  38. trng0 at obio1 addr 0x48310000-0x48311fff intr 111
  39. cpsw0 at obio2 addr 0x4a100000-0x4a107fff intrbase 40: TI Layer 2 3-Port Switch
  40. cpsw0: Ethernet address c8:a0:30:af:5f:da
  41. ukphy0 at cpsw0 phy 0: OUI 0x00800f, model 0x000f, rev. 1
  42. ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  43. timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
  44. Fatal kernel mode data abort: 'External Non-Linefetch Abort (S)'
  45. trapframe: 0x80a61e70
  46. FSR=00001808, FAR=e0044010, spsr=20000113
  47. r0 =00000000, r1 =e0044000, r2 =00000010, r3 =00000001
  48. r4 =000003e8, r5 =9ff981a0, r6 =80310d14, r7 =00000001
  49. r8 =80715c1c, r9 =9df31ed8, r10=87ffc01b, r11=80a61edc
  50. r12=80a61ee0, ssp=80a61ec0, slr=803057cc, pc =80310d14
  51.  
  52. Stopped in pid 0.1 (system) at  netbsd:generic_bs_w_4:  str     r3, [r1, r2]
  53.  
View raw paste Reply